The Configuration Tree Functions | Line Functions - Page 41 |
VPN Lines
VPN lines can be added by
Line Number: The line number you wish to use - it must be unique.
Telephone Number: Used to remember the telephone number of this line. This entry is for information only.
Outgoing Channels: Defines the number of channels that are available on this line. Normally be the same as The Number Of Channels field, but can be reduced to ensure that incoming calls cannot be blocked by outgoing calls..
Voice Channels: The number of channels to be made available for voice use over the VPN.
Incoming/Outgoing Group ID: One group can contain multiple lines. Short Codes and Incoming Call Routes use these numbers to indicate which line they are to use
Data Channels: Not used under normal operation.
Number Of Channels: The total number of channels to be made available on the wide area network, i.e., effectively dividing it into several “virtual circuits” for different purposes. Each channel is equivalent to one call.
TEI: Terminal Equipment Identifier. For VPN lines, this should always be set to zero.
National Prefix: Not applicable.
Prefix: Not applicable.
International Prefix: Not applicable.
See page 39 for the Short Codes Tab.
INDeX IPNC Cassette Administration Manual | The Configuration Tree Functions - Page 41 |
38DHB0002UKDD – Issue 7 (22/11/02) | Line Functions |