Avaya 38DHB0002UKDD manual Configure INDEX environment using the T

Page 76 - Part 1 IP Connectivity					How Do I?
		Task			Description
	Step 1
	Configure INDEX environment using the (T)				The configuration must ensure the DDI digits
	type interface option (see page 70).				<396010> are routed to the IPNC line card.
	Step 2				Use the Monitor application, select Call and enable
	Test INDeX configuration for both Units.
					Call events. Point the Monitor application to the local
					IPNC and dial the ARS routed number configured in
					Step 1 from an on-switch extension. The Call event on
					the Monitor Application must indicate the call is
					presented to the local IPNC.
					The resultant tone returned by the on-switch extension
					(i.e. engaged or busy) is NOT significant at this stage.
					It is only important that the call is presented to the
					IPNC.
	Step 3				For quick set-up, avoiding the use of separate
	Obtain the configuration file for the IP401 and
	the IPNC. Create an Intranet Service type				incoming and outgoing account names, use a
	using the Service parameters set out below.				common Service Name and Service Account Name.
	Services Parameter		IPNC	IP401	For example, on the IPNC set both the Name and
	Name		IP401	IPNC	Account Name to ISDN_link and set both the Service
					Password and Service Incoming Password to a
	Account Name		IPNC	IP401
					unique password that is common to both sites. Then
	Password		password1	password2
					configure the IP401 using these identical parameters.
	Incoming Password		password2	password1
					(See Service Configuration on page 46)
	Step 4				It is good practice to initially configure dial up
	On the IP401 Service form, configure the
	Telephone number to access the IPNC on the				operation in one direction only. If a 9 is used to access
	Corporate network.				the external line then this must precede the number to
	• Telephone number 396010				be dialled.
	Step 5				The RAS allows the router to identify which incoming
	In the Extension field of the default RAS (Dial				number are to be associated to data routing. The RAS
	In) on the IPNC add the number to match the				Extension field is use for this purpose and by default
	Incoming call (DDI).				the match is made from right to left.
	Step 6				This configuration is suitable for VoIP with any
	For the IP401 and the IPNC apply the
	parameters on the PPP tab of Intranet service				compression mode other than G711.
	type (created previously) as described in the
	table below
	Parameter		IPNC	IP401
	Service/PPP		Yes	Yes	(See The PPP Tab on page 52)
	1. Multilink
	2. IPHC
	RAS/PPP		Yes	Yes
	1. Multilink

Page 76 - How Do I?	INDeX IPNC Cassette Administration Manual
Part 1 IP Connectivity	38DHB0002UKDD – Issue 7 (22/11/02)