Appendix E: Cables | DTE Cable - Page 133 |
Appendix E: Cables
This section provides information about the cables that are used with IPNC.
All of the following cables are for internal use only.
All structured cabling/site wiring must conform to all local regulations.
CAUTION: All ISDN and WAN cables should not be longer than 5 meters in length.
DTE Cable
AB
C
D
A25 Way (or 9 Way on IP412)
B9 Way
C12 core screened cable - each core is 7/0.203mm (24 AWG) tinned copper stranded wire, nominal capacitance of 95pF/m, resistance of 92 Ω/km, screened with tinned copper braid, maximum working voltage of 440V rms and a Maximum current per core of 1A rms
D2 meters.
Pin Connections
End A (25 Way) | End A (9 Way) | Name | End B |
2 | 3 | Receive data | 3 |
3 | 2 | Transmit Data | 2 |
4 | 7 | RTS (Request To Send) | 7 |
5 | 8 | CTS (Clear To Send) | 8 |
6 | 6 | DSR (Data Set Ready) | 6 |
7 | 5 | Ground | 5 |
8 | 1 | DCD (Data Carrier | 1 |
|
| Detect) |
|
20 | 4 | DTR (Data Terminal | 4 |
|
| Ready) |
|
22 | 9 | RI (Ring Indicator) | 9 |
INDeX IPNC Cassette Administration Manual | Appendix E: Cables - Page 133 |
38DHB0002UKDD – Issue 7 (22/11/02) | DTE Cable |