![](/images/new-backgrounds/1205993/20599393x1.webp)
CHAPTER 2 GETTING STARTED
Printing the Test Patterns or Lists
You can check print quality and print a list of available fonts before you actually start working with the printer. To do so, follow these steps:
1.Make sure that you have already set the toner cartridge and loaded paper into the cassette or the
2Turn on the printer. Wait until the display shows the message as follows.
LJ READY 001P T1
or
LJ READY 001P MP
3.Press the SEL switch to set the printer
4.Hold down the SHIFT switch and press the TEST switch.
5.Press the ▲ or ▼ switch to scroll through the display until the desired message appears. To print your selection, press the SET switch.
Choose from one of the following selections : To print out the test pattern,
TEST PRINT
To print out the list of printer settings,
PRINT CONFIG
To print out the list of internal or resident fonts,