Brother HL-960 manual Control Panel

							CHAPTER 4 CONTROL PANEL
Mode Menu (Continued)		Setting Menu			Sub-Setting Menu		Setting
FORMAT MODE	ORIENTATION		ORI=PORTRAIT				PORTRAIT or LANDSCAPE
(See 4-18.)		AUTO MODE		AUTO LF=OFF			ON … LF + CR
							OFF … CR only
					AUTO CR=OFF		ON … LF, FF, or VT + CR
							OFF … LF, FF, or VT only
					AUTO WRAP=OFF		ON … Auto wrap on
							OFF … Auto wrap off
					AUTO SKIP=ON		ON … Auto FF at bottom
							margin
					(HP mode)		OFF … No FF at bottom
							margin
					AUTO MASK=OFF		ON … Auto mask on
					(EPSON & IBM modes)		OFF … Auto mask off
					exit		Exit to AUTO MODE
		PAGE FORMAT MODE			PAPER =LETTER		LETTER, LEGAL, A4, A5,
					(For 110/120V model)		A6, B5, B6, EXECUTIVE,
					PAPER =A4		COM10, MONARCH, C5
					(For 220/240V model)		and
							DL
					LEFT M = 0C		0 to 126 columns
					RIGHT M = 80C		10 to 136 columns
					(Letter, Portrait)
					RIGHT M = 78C		10 to 136 columns
					(A4, Portrait)
					TOP M =0.5” (HP mode)		0, 0.33, 0.5, 1.0, 1.5, or
							2.0”
					BOTTOM M=0.5”		0, 0.33, 0.5, 1.0, 1.5, or
					(HP mode)		2.0”
					LINES = 60L		5 to 128 lines/page
					(HP, Letter, Portrait)
					LINES = 64L		5 to 128 lines/page
					(HP, A4, Portrait)
					X OFFSET= 0		-500 (left) to +500 (right)
							dots
					Y OFFSET= 0		-500 (down) to +500 (up)
							dots
					exit		Exit to PAGE FORMAT
							MODE
		exit					Exit to FORMAT MODE
RESOLUTION MODE	RESOLUTION		RESOLUTION				300 or 600 dpi
(See 4-26.)	exit						Exit to RESOLUTION MODE
PAGE PROTECTION		PROTECT=AUTO					AUTO, OFF, LETTER, A4, or
(See 4-28.)							LEGAL
CARD OPERATION		When the commercial flash memory card or the HDD card has not been
		formatted:
(HP mode only)		FORMAT CARD				Format the flash memory
(See 4-28.)						card or the HDD card.
		exit				Exit to CARD OPERATION

4–9