Brother HL-960 manual Internal Font

USER’S GUIDE

3.Press the SET switch.

When you enter the “SELECT FONT” menu, you can select the internal font, optional slot font, or permanent download font. The display shows the following message.

INTERNAL FONT *

Press the ▲ or ▼ switch until the desired font source appears on the display.

Display Message	Font Source
INTERNAL FONT	Internal font of the printer
SLOTFONT A	Optional card font in the upper slot
	A
SLOTFONT B	Optional cartridge font in the lower
	slot B
PERMANENT FONT	Permanent download font defined in
	the HP emulation mode

Since these steps instruct you to select the standard font, select the “INTERNAL FONT” message.

✒Notes

When you select the optional fonts or permanent download fonts, note the following:

∙If the optional font cartridge/card is not installed, the optional font cannot be selected. No selection appears on the display.

∙If permanent fonts are not downloaded in the HP emulation mode or another emulation mode is selected, the permanent fonts cannot be selected. No selection appears on the display.

∙When you select the optional font or download font, press the SET switch to enter the sub-menu. After you select your desired one with the ▲ or ▼ switch, press the SET switch again. The list you can print out with the TEST switch helps you to select the optional fonts or permanent download fonts. See “TEST switch” in this chapter or “Selecting the Optional Fonts” in Chapter 5.

4.Press the SET switch.

When you enter the font setting mode, the display first shows the current font with an asterisk.

4–50