![](/images/new-backgrounds/1205993/20599389x1.webp)
CHAPTER 2 GETTING STARTED
Turning the Printer On and Off
Plugging in the Power Cord
Plug in the power cord as follows:
1.Make sure that the POWER switch is OFF “O”: the switch is on the front right hand side of the printer.
2.Attach the power cord to the printer and plug it into an appropriate AC outlet.
Fig. 2-22 Plugging in the Power Cord
☛Caution
∙Check the AC voltage. This printer should be operated at the specified voltage and frequency.
• USA and Canada: | AC 110 to 120 V, 60 Hz |
• Europe and Australia: | AC 220 to 240 V, 50 Hz |
∙Since this printer must be electrically grounded, the power cord should be connected to a grounded AC outlet.
∙The total length of the power cord, including extension cords, should not exceed 5 meters (16.4 feet). Use of a longer power cord may result in reduced voltage or malfunctions.
∙Do not unplug the power cord to turn off the printer.
∙The printer should be installed near a power outlet which is easily accessible.