Brother HL-960 manual Epson/Ibm=Epson, Keep PCL=OFF

CHAPTER 4 CONTROL PANEL

5. Set “Time Out” with the ▲ or ▼ switch.

TIME OUT= 5s *

This time out is the duration during which the printer will not allow an automatic emulation change. You can set it to 1 second from 99 seconds: the factory setting is 5 seconds.

6.Press the SET switch.

The next sub-item “EPSON/IBM” appears on the display.

EPSON/IBM=EPSON*

7.Select EPSON or IBM with the ▲ or ▼ switch.

Since the printer cannot distinguish between the EPSON and IBM emulation modes, you need to select the EPSON or IBM emulation even in the AUTO mode.

When the printer receives data from the computer, it automatically selects the emulation mode in any of the following combinations:

EPSON/IBM Priority	EPSON IBM
Auto Selection Mode HP LaserJet 4	HP LaserJet 4
HP-GL	HP-GL

EPSON FX-850 IBM Proprinter XL

8.Press the SET switch.

The next sub-item “KEEP PCL” appears on the display.

KEEP PCL=OFF

This function is for permanent macros and fonts downloaded in the HP LaserJet 4 mode.

9.Turn on or off the “KEEP PCL” function with the ▲ or ▼ switch.

When you do not need to use the permanent macros and fonts in the HP LaserJet 4 mode, turn this function off. When you use them, you can turn it on.

4–61