USER’S GUIDE
5.Press the SET switch.
When you enter the “SELECT FONT” menu, you can select the internal font, optional slot font, or permanent download font. The display shows the following message.
INTERNAL FONT p*
Press the ▲ or ▼ switch until the desired font source appears on the display.
Display Message | Font Source |
INTERNAL FONT | Internal font of the printer |
SLOTFONT A | Optional card font in the upper slot |
| A |
SLOTFONT B | Optional cartridge font in the lower |
| slot B |
PERMANENT FONT | Permanent download font defined in |
| the HP emulation mode |
Since these steps instruct you to select the standard font, select the “INTERNAL FONT” message.
✒Notes
When you select the optional fonts or permanent download fonts, note the following:
∙If the optional font cartridge/card is not installed, the optional font cannot be selected. No selection appears on the display.
∙If permanent fonts are not downloaded in the HP emulation mode or another emulation mode is selected, they cannot be selected. No selection appears on the display.
∙The list you can print out with the TEST switch helps you to select the optional fonts or permanent download fonts. See “TEST switch” in this chapter or “Selecting the Optional Fonts” in Chapter 5.
6.Press the SET switch.
When you enter the font setting mode, the display first shows the current font with an asterisk.
BROUGHAM p*
7.Press the ▲ or ▼ switch until the desired font appears on the display.
