
USER’S GUIDE
FONT Switch
Pressing the FONT switch allows you to select fonts and symbol/character sets.
✒Notes
When you use the FONT switch, note the following:
∙The FONT switch is effective in the HP LaserJet 4, EPSON FX- 850, and IBM Proprinter XL modes. However the settings are subject to the current emulation mode.
∙If the application software supports font and symbol/character set selection, you do not need to set them with the FONT switch. The software or command setting overrides the switch setting.
∙If you want to use optional fonts other than the printer’s resident fonts, be sure to install a font cartridge/card that has your desired fonts. The printer automatically selects the font that has exactly the same or similar characteristics as those you set through the software or with a command. If the installed font cartridge/card happens to have a font of similar characteristics, the printer will print with an unexpected font.
∙You can store the fonts you require on a flash memory card or a HDD card only in the HP LaserJet 4 mode when one is installed. See “CARD OPERATION.”
Setting the Font and Symbol Set in the HP LaserJet 4 Mode
When the HP LaserJet 4 emulation mode has been selected, the font and symbol set can be set separately as the primary or secondary font.
The display shows the following setting menus:
PRIMARY FONT
SELECT FONT p
Set the primary font.
SYMBOL SET | p |
Set the symbol set.
TABLE PRINT p
Print the code table.
exit
Exit