CHAPTER 4 CONTROL PANEL
• Save Macro
✒Note
The “SAVE MACRO” menu appears only in the HP LaserJet 4 emulation mode.
If you have downloaded a macro in the printer’s memory, you can save the macro on the installed flash memory card or HDD card.
If a macro has been downloaded in the printer’s memory and you press the SET switch at “SAVE MACRO,” the printer prompts you to select the ID of the macro.
MACRO ID=#####
Select the ID with the ▲ or ▼ switch and press the SET switch again, so that the printer saves the macro with the selected ID.
✒Note
When you see an asterisk on the display, the ID number has been used for another macro or data. If you select the used ID number, the old macro or data is erased and replaced with the new macro.
You can execute a macro with the macro execution command.
• Primary Font or Secondary Font
✒Note
The “PRIMARY FONT” and “SECONDARY FONT” menus appear only in the HP LaserJet 4 emulation mode.
If you have selected the primary or secondary font with the FONT switch, you can save the font on the installed flash memory card or HDD card.
When you press the SET switch at “PRIMARY FONT” or “SECONDARY FONT,” the printer prompts you to select the ID of the font.
