![](/images/new-backgrounds/1205993/205993295x1.webp)
USER’S GUIDE
TEST Switch
You can test the printer or print out the list of fonts with the TEST switch. To do so, hold down the SHIFT switch and press the TEST switch. You will then enter the test mode where you may test the printer or print out the list of fonts.
To test the printer, follow these steps:
1.Press the SEL switch to set the printer
2.Hold down the SHIFT switch and press the TEST switch.
When you enter the test mode, the display shows the first test mode item.
TEST PRINT
3.Press the ▲ or ▼ switch until the desired test mode appears on the display.
Display Message | Test Mode |
TEST PRINT | Performs the printer test and prints |
| out the test pattern. |
|
|
PRINT CONFIG | Prints out the list of panel switch |
| settings you have configured for the |
| printer as user settings. |
|
|
PRINT FONTS I | Prints out the list of internal or |
| resident fonts. |
|
|
PRINT FONTS C | Prints out the list of optional fonts |
| stored in the font cartridge/card. |
|
|
PRINT FONTS P | Prints out the list of permanent |
| download fonts. |
|
|
exit | Exits from the test mode. The |
| printer does not perform the test. |