CHAPTER 4 CONTROL PANEL
SECONDARY FONT
SELECT FONT s
SYMBOL SET | s |
TABLE PRINT s
exit
Set the secondary font.
Set the symbol set.
Print the code table.
Exit
To select the font and symbol set in the HP LaserJet 4 mode, follow these steps:
1.Press the SEL switch to set the printer
2.Press the FONT switch.
The display shows the following menu.
PRIMARY FONT
3.Press the ▲ or ▼ switch to select the primary or secondary font setting menu.
PRIMARY FONT
SECONDARY FONT
For this session, select the primary font setting menu.
4.Press the SET switch.
The display shows the font setting menu. You can skip the font setting menu and advance to the symbol set setting menu with the ▲ or ▼ switch. For this session, go to the next step.
SELECT FONT p
✒Note
The last lowercase letter “p” or “s” indicates the primary or secondary font setting mode. If you select the secondary font setting mode, the display shows “s” in the following messages.
