Avaya 555-233-128 Viewing Parameter Values, Name System Value Format, Filename.ext, Cccccccccc

		The View Administrative Option
Table 2: Viewing Parameter Values (continued)
Name	System Value	Format
Protocol	cccccccc	Up to 8 ASCII characters, depending on the
		system-specific signaling protocol (H.323, SIP,
		etc.) currently being used.
	filename.ext	Up to 16 ASCII characters: name of the
		application code file (“big app”) currently stored
		in the telephone.
	ccccccc Ethernet	Ethernet connection. From 2 to 7 ASCII
		characters, either “100Mbps”, “10 Mbps”, or
		“No.”
	filename.ext	Up to 16 ASCII characters. Name of the boot
		code file (“little app”) currently stored in the
		telephone.
	cccccccccc	Up to 10 ASCII characters. DSP code version.
	cccccccccc	Up to 10 ASCII characters. DSP hardware
		version, displayed only if a DSP hardware
		version identifier is available.
Build	cccccccccc	Build identifier. Up to 1- ASCII characters.
DHCPSTD	n	DHCP standard flag. If “1” the telephone strictly
		follows the DHCP standard by giving up IP
		Addresses when the DHCP lease expires. If “0”
		the telephone uses the IP Address until it
		detects a reset or a conflict.
Audio	nnn	Audio environment selection index (0 to 107);
Environment		the AUDIOENV system value.
Handset	n	The AUDIOSTHS system value where 0=No
sidetone		change, 1=6dB below nominal, 2=no sidetone -
		infinite loss.
Headset	n	The AUDIOSTHD system value where 0=No
sidetone		change, 1=6dB below nominal, 2=no sidetone -
		infinite loss.
		3 of 3

Issue 6 February 2007 87