Chapter 3 | Configuration |
3.Type the new IP address as shown in the example above and press Enter. Leading zeroes may be omitted.
4.After the IP address is accepted, the Netmask prompt is automatically displayed. The prompt has a default value based on the IP address.
5.Type the new Netmask value in the correct format or press Enter to accept the default value.
6.Type 0 to return to the main menu.
Changes to IP Addresses and Netmasks require you to reset the agent. You may reset the agent now, or at the end of the entire Setup session.
P117F(R) Stackable Switch Installation Guide | 23 |
