Chapter 2 | Installation |
Table 2 Meaning of the P117F Front Panel Buttons
Button | Function |
| Select |
Reset
Meaning
The buttons determine what function will be displayed by the 17 Port LEDs (the top two rows of LEDs).
The five Function LEDs (above the Select buttons) show which function is currently displayed by the Port LEDs. The Port LEDs can display either Link, Collision, Transmit, Receive or Full Duplex.
If, for example, the Link (LNK) LED is lit, then LEDs 1 to 17 will display the Link status of every port.
(For P117FR ATM port LEDs, see also Table 4).
Press left or right button to toggle the Port LED display between functio
Press and hold both buttons simultaneously for two seconds to reset the entire P110 stack. In a Reset, all LED indicators turn on. Pressing Reset does not affect configuration settings.
Table 3 Meaning of the P117F(R) Stackable Switch front panel LEDs
LED Indicator | Function | Status | |
|
|
|
|
PWR | Power | OFF | |
|
|
| ON |
|
|
| Blink |
NMA | Agent | OFF | |
|
|
| ON |
RED NMA | Reserved for future use | ||
OPR | CPU | OFF | |
|
| Operation | Blink |
Function LED |
| Port LED | |
| LNK | Link status | OFF |
|
|
| ON |
|
|
| Blink once |
|
|
| Blink |
|
|
| twice |
| COL | Collision | OFF |
|
|
| ON |
|
|
|
|
| Tx | Transmit to | OFF |
|
| line | ON |
|
|
|
|
| Rx | Receive | OFF |
|
| from line | ON |
|
|
|
|
| FDX | Half/Full | OFF |
|
|
|
|
Meaning
Mains power not connected Mains power connected Working on
No agent in this module
This module contains an active agent
CPU is OK
CPU is faulty
(1 to 17)
Port Disabled
Port is enabled and link is OK Link Test Fail
Partition (Ethernet only)
No Collision (ATM is always OFF) Collision occurred on line (Ethernet only)
No activity
Data transmitted
No activity
Data Received
Half duplex connection to port
P117F(R) Stackable Switch Installation Guide | 11 |
