#Aa, Syntax #AACHKcr | B&B Electronics I-7011 guide

2.3 #AA

Description : Read Analog Input

Syntax : #AA[CHK](cr)

#delimiter character

AAaddress of reading module(00 to FF) Response : Valid Command : >(Data)[CHK](cr)

Syntax error or communication error may get no re- sponse.

>delimiter for valid command

(Data) analog input value, reference Sec.1.10 for its format. For I-7018/18P, the data is the combination for each chan-

nel respectively.
Example :
Command : #01	Receive : >+02.635
Read address 01, return data success.
Command : #02	Receive : >4C53

Read address 02, return data in HEX format success. Command : #04

Receive : >+05.123+04.153+07.234-02.356+10.000- 05.133+02.345+08.234

Module address 04 is I-7018. Read address 04, get analog input data of 8 channels.

Related Command :

Sec.2.1 %AANNTTCCFF, Sec.2.7 $AA2

Related Topics :

Sec.1.10 Configuration Tables

24

I-7011, I-7018 User Manual

Rev:B1.0

Image 24

B&B Electronics I-7011 user manual #Aa, Syntax #AACHKcr

Contents

Warranty CopyrightTrademark Table of Contents @AADOData High/Low Alarm Introduction More Information Pin Assignment RevB1.0 Specifications 7011/I-7011D 7011P/I-7011PD 7018 7018P Block Diagram Wire Connection Page Default Setting Jumper SettingQuick Start Calibration Don’t Perform Calibrate Until You Really Understand Configuration Tables Baudrate Setting CC Analog Input Type Setting TTData Format Setting FF Analog input type and data format table Type Input Range Data Format +F.S Zero Code RevB1.0 Type Input Range Data Format +F.S Zero Code Command Sec.2.19 Related Command Syntax %AANNTTCCFFCHKcrAACHKcr ?AACHKcr Syntax #**CHKcr Example #AA Syntax #AACHKcr Response Valid Command DataCHKcr Invalid Command ?AACHKcr #AANSyntax #AANCHKcr $AA0 Syntax $AA0CHKcr $AA1 Syntax $AA1CHKcr $AA2 Syntax $AA2CHKcrAATTCCFFCHKcr FF data format of module reference Sec.1.10 Example $AA3 Syntax $AA3CHKcr $AA4 Syntax $AA4CHKcrAASDataCHKcr Data synchronized data, format reference Sec.1.10 Example 10 $AA5VV Syntax $AA5VVCHKcr 11 $AA6 Syntax $AA6CHKcrAAVVCHKcr 12 $AA8 Syntax $AA8CHKcrAAVCHKcr 13 $AA8V Syntax $AA8VCHKcr Related Command Sec.2.8 $AA3 14 $AA9DataSyntax $AA9DataCHKcr AA address of response module 00 to FF Example 15 $AAB Syntax $AABCHKcrAASCHKcr 16 $AAF Syntax $AAFCHKcrAADataCHKcr 17 $AAM Syntax $AAMCHKcr 18 $AAZData Syntax $AAZDataCHKcr Read address 01 module name, return 7018. Related Command 19 ~AAODataSyntax ~AAODataCHKcr 20 ~AAEV Syntax ~AAEVCHKcrRelated Topic 21 @AADI Syntax @AADICHKcrAASOOIICHKcr Level. Example High 22 @AADOData 23 @AAEAT Syntax @AAEATCHKcr 24 @AAHIData 25 @AALOData Related Command Sec.2.23 @AAEAT Related Topic 26 @AADASyntax @AADACHKcr 27 @AACA Syntax @AACACHKcr Read address 01 high alarm, return +2.5000. Related Command 28 @AARHSyntax @AARHCHKcr 29 @AARL Read address 01 event counter, return 1234. Related Command 30 @AARESyntax @AARECHKcr 31 @AACE Syntax @AACECHKcr 32 ~ Description Host OKSyntax ~**CHKcr Response No response. Example Host watchdog timeout flag, 0=Clear, 1=Set Example 33 ~AA0Syntax ~AA0CHKcr AASSCHKcr 34 ~AA1 Syntax ~AA1CHKcr 35 ~AA2 Syntax ~AA2CHKcr 36 ~AA3EVV Syntax ~AA3EVVCHKcr 37 ~AA4 Syntax ~AA4CHKcrAAPPSSCHKcr SS Safe Value, data format is same as PP Example 38 ~AA5PPSS Syntax ~AA5PPSSCHKcr INIT* pin Operation Module Status Dual Watchdog Operation Digital Input and Event CounterDigital Output Dual Watchdog = Module Watchdog + Host Watchdog High/Low Alarm Thermocouple Measurement