10 $AA5VV, Syntax $AA5VVCHKcr | B&B Electronics I-7011 instruction

2.10 $AA5VV

Description : Set Channel Enable

Syntax : $AA5VV[CHK](cr)

$	delimiter character
AA	address of setting module (00 to FF)
5	command for settting channel enable

VVchannel enable/disable, 00 is all disabled, and FF is all enabled.

Response : Valid Command :		!AA[CHK](cr)
	Invalid Command :	?AA[CHK](cr)
	Syntax error or communication error may get no re-
	sponse.
!	delimiter for valid command

?delimiter for invalid command

AAaddress of response module(00 to FF) Example :

Command : $0155A	Receive : !01
Set address 01	enable channel 1,3,4,6 and disable channel
0,2,5,7, return success.
Command : $016	Receive : !015A

Read address 01 channel status, return channel 1,3,4,6 enable and channel 0,2,5,7 disable.

Related Command :

Sec.2.11 $AA6

Note : The command is for I-7018/18P only

Rev:B1.0

I-7011, I-7018 User Manual

31

Image 31

B&B Electronics I-7011 user manual 10 $AA5VV, Syntax $AA5VVCHKcr

Contents

Copyright WarrantyTrademark Table of Contents @AADOData High/Low Alarm More Information Introduction Pin Assignment RevB1.0 7011/I-7011D Specifications 7011P/I-7011PD 7018P 7018 Block Diagram Wire Connection Page Jumper Setting Default SettingQuick Start Don’t Perform Calibrate Until You Really Understand Calibration Baudrate Setting CC Analog Input Type Setting TT Configuration TablesData Format Setting FF Type Input Range Data Format +F.S Zero Code Analog input type and data format table RevB1.0 Type Input Range Data Format +F.S Zero Code Command Sec.2.19 ?AACHKcr Related CommandSyntax %AANNTTCCFFCHKcr AACHKcr Example Syntax #**CHKcr Syntax #AACHKcr #AA #AAN Response Valid Command DataCHKcr Invalid Command ?AACHKcrSyntax #AANCHKcr Syntax $AA0CHKcr $AA0 Syntax $AA1CHKcr $AA1 FF data format of module reference Sec.1.10 Example $AA2Syntax $AA2CHKcr AATTCCFFCHKcr Syntax $AA3CHKcr $AA3 Data synchronized data, format reference Sec.1.10 Example $AA4Syntax $AA4CHKcr AASDataCHKcr Syntax $AA5VVCHKcr 10 $AA5VV Syntax $AA6CHKcr 11 $AA6AAVVCHKcr Syntax $AA8CHKcr 12 $AA8AAVCHKcr Syntax $AA8VCHKcr 13 $AA8V AA address of response module 00 to FF Example Related Command Sec.2.8 $AA314 $AA9Data Syntax $AA9DataCHKcr Syntax $AABCHKcr 15 $AABAASCHKcr Syntax $AAFCHKcr 16 $AAFAADataCHKcr Syntax $AAMCHKcr 17 $AAM Syntax $AAZDataCHKcr 18 $AAZData 19 ~AAOData Read address 01 module name, return 7018. Related CommandSyntax ~AAODataCHKcr Syntax ~AAEVCHKcr 20 ~AAEVRelated Topic Level. Example 21 @AADISyntax @AADICHKcr AASOOIICHKcr High 22 @AADOData Syntax @AAEATCHKcr 23 @AAEAT 24 @AAHIData 25 @AALOData 26 @AADA Related Command Sec.2.23 @AAEAT Related TopicSyntax @AADACHKcr Syntax @AACACHKcr 27 @AACA 28 @AARH Read address 01 high alarm, return +2.5000. Related CommandSyntax @AARHCHKcr 29 @AARL 30 @AARE Read address 01 event counter, return 1234. Related CommandSyntax @AARECHKcr Syntax @AACECHKcr 31 @AACE Response No response. Example 32 ~Description Host OK Syntax ~**CHKcr AASSCHKcr Host watchdog timeout flag, 0=Clear, 1=Set Example33 ~AA0 Syntax ~AA0CHKcr Syntax ~AA1CHKcr 34 ~AA1 Syntax ~AA2CHKcr 35 ~AA2 Syntax ~AA3EVVCHKcr 36 ~AA3EVV SS Safe Value, data format is same as PP Example 37 ~AA4Syntax ~AA4CHKcr AAPPSSCHKcr Syntax ~AA5PPSSCHKcr 38 ~AA5PPSS Module Status INIT* pin Operation Dual Watchdog = Module Watchdog + Host Watchdog Dual Watchdog OperationDigital Input and Event Counter Digital Output Thermocouple Measurement High/Low Alarm