Syntax #**CHKcr, Example | B&B Electronics I-7011 specs

2.2 #**

Description : Synchronized Sampling

Syntax : #**[CHK](cr)

#a delimiter character

**synchronized sampling command Response : No response

Example :

Command : $014	Receive : ?01
Read synchronized sampling data, return no data valid.
Command : #**	No response
Send synchronized sampling command.
Command : $014	Receive : >011+025.123
First read, get status=1, first read.
Command : $014	Receive : >010+025.123

Second read, get status=0, have readed.

Related Command :

Sec.2.9 $AA4

Note : The command is for I-7011/11D/11P/11PD only

Rev:B1.0

I-7011, I-7018 User Manual

23

Image 23

B&B Electronics I-7011 user manual Syntax #**CHKcr, Example

Contents

Trademark WarrantyCopyright Table of Contents @AADOData High/Low Alarm More Information Introduction Pin Assignment RevB1.0 7011/I-7011D Specifications 7011P/I-7011PD 7018P 7018 Block Diagram Wire Connection Page Quick Start Default SettingJumper Setting Don’t Perform Calibrate Until You Really Understand Calibration Data Format Setting FF Configuration TablesBaudrate Setting CC Analog Input Type Setting TT Type Input Range Data Format +F.S Zero Code Analog input type and data format table RevB1.0 Type Input Range Data Format +F.S Zero Code Command Sec.2.19 ?AACHKcr Related CommandSyntax %AANNTTCCFFCHKcr AACHKcr Example Syntax #**CHKcr Syntax #AACHKcr #AA Syntax #AANCHKcr Response Valid Command DataCHKcr Invalid Command ?AACHKcr#AAN Syntax $AA0CHKcr $AA0 Syntax $AA1CHKcr $AA1 FF data format of module reference Sec.1.10 Example $AA2Syntax $AA2CHKcr AATTCCFFCHKcr Syntax $AA3CHKcr $AA3 Data synchronized data, format reference Sec.1.10 Example $AA4Syntax $AA4CHKcr AASDataCHKcr Syntax $AA5VVCHKcr 10 $AA5VV AAVVCHKcr 11 $AA6Syntax $AA6CHKcr AAVCHKcr 12 $AA8Syntax $AA8CHKcr Syntax $AA8VCHKcr 13 $AA8V AA address of response module 00 to FF Example Related Command Sec.2.8 $AA314 $AA9Data Syntax $AA9DataCHKcr AASCHKcr 15 $AABSyntax $AABCHKcr AADataCHKcr 16 $AAFSyntax $AAFCHKcr Syntax $AAMCHKcr 17 $AAM Syntax $AAZDataCHKcr 18 $AAZData Syntax ~AAODataCHKcr Read address 01 module name, return 7018. Related Command19 ~AAOData Related Topic 20 ~AAEVSyntax ~AAEVCHKcr Level. Example 21 @AADISyntax @AADICHKcr AASOOIICHKcr High 22 @AADOData Syntax @AAEATCHKcr 23 @AAEAT 24 @AAHIData 25 @AALOData Syntax @AADACHKcr Related Command Sec.2.23 @AAEAT Related Topic26 @AADA Syntax @AACACHKcr 27 @AACA Syntax @AARHCHKcr Read address 01 high alarm, return +2.5000. Related Command28 @AARH 29 @AARL Syntax @AARECHKcr Read address 01 event counter, return 1234. Related Command30 @AARE Syntax @AACECHKcr 31 @AACE Response No response. Example 32 ~Description Host OK Syntax ~**CHKcr AASSCHKcr Host watchdog timeout flag, 0=Clear, 1=Set Example33 ~AA0 Syntax ~AA0CHKcr Syntax ~AA1CHKcr 34 ~AA1 Syntax ~AA2CHKcr 35 ~AA2 Syntax ~AA3EVVCHKcr 36 ~AA3EVV SS Safe Value, data format is same as PP Example 37 ~AA4Syntax ~AA4CHKcr AAPPSSCHKcr Syntax ~AA5PPSSCHKcr 38 ~AA5PPSS Module Status INIT* pin Operation Dual Watchdog = Module Watchdog + Host Watchdog Dual Watchdog OperationDigital Input and Event Counter Digital Output Thermocouple Measurement High/Low Alarm