20 ~AAEV, Syntax ~AAEVCHKcr, Related Topic | B&B Electronics I-7011

2.20 ~AAEV

Description : Enable/Disable Calibration

Syntax : ~AAEV[CHK](cr)

~delimiter character

AA	address of setting module (00 to FF)
E	command for enable/disable calibration
V	1=enable calibration, 0=disable calibration
Response : Valid Command :		!AA[CHK](cr)
	Invalid Command :	?AA[CHK](cr)
	Syntax error or communication error may get no re-
	sponse.
!	delimiter for valid command

?delimiter for invalid command

AAaddress of response module(00 to FF) Example :

Command : $010	Receive : ?01
Perform address 01 span calibration, return it is not ready for
calibration.
Command : ~01E1	Receive : !01
Set address 01 to enable calibration, return success.
Command : $010	Receive : !01
Preform address 01 span calibration, return success.
Related Command :
Sec.2.5 $AA0, Sec.2.6 $AA1
Related Topic :
Sec.1.9 Calibration

Rev:B1.0	I-7011, I-7018 User Manual	41

Image 41

B&B Electronics I-7011 user manual 20 ~AAEV, Syntax ~AAEVCHKcr, Related Topic

Contents

Trademark WarrantyCopyright Table of Contents @AADOData High/Low Alarm More Information Introduction Pin Assignment RevB1.0 7011/I-7011D Specifications 7011P/I-7011PD 7018P 7018 Block Diagram Wire Connection Page Quick Start Default SettingJumper Setting Don’t Perform Calibrate Until You Really Understand Calibration Data Format Setting FF Configuration TablesBaudrate Setting CC Analog Input Type Setting TT Type Input Range Data Format +F.S Zero Code Analog input type and data format table RevB1.0 Type Input Range Data Format +F.S Zero Code Command Sec.2.19 Syntax %AANNTTCCFFCHKcr Related CommandAACHKcr ?AACHKcr Example Syntax #**CHKcr Syntax #AACHKcr #AA Syntax #AANCHKcr Response Valid Command DataCHKcr Invalid Command ?AACHKcr#AAN Syntax $AA0CHKcr $AA0 Syntax $AA1CHKcr $AA1 Syntax $AA2CHKcr $AA2AATTCCFFCHKcr FF data format of module reference Sec.1.10 Example Syntax $AA3CHKcr $AA3 Syntax $AA4CHKcr $AA4AASDataCHKcr Data synchronized data, format reference Sec.1.10 Example Syntax $AA5VVCHKcr 10 $AA5VV AAVVCHKcr 11 $AA6Syntax $AA6CHKcr AAVCHKcr 12 $AA8Syntax $AA8CHKcr Syntax $AA8VCHKcr 13 $AA8V 14 $AA9Data Related Command Sec.2.8 $AA3Syntax $AA9DataCHKcr AA address of response module 00 to FF Example AASCHKcr 15 $AABSyntax $AABCHKcr AADataCHKcr 16 $AAFSyntax $AAFCHKcr Syntax $AAMCHKcr 17 $AAM Syntax $AAZDataCHKcr 18 $AAZData Syntax ~AAODataCHKcr Read address 01 module name, return 7018. Related Command19 ~AAOData Related Topic 20 ~AAEVSyntax ~AAEVCHKcr Syntax @AADICHKcr 21 @AADIAASOOIICHKcr Level. Example High 22 @AADOData Syntax @AAEATCHKcr 23 @AAEAT 24 @AAHIData 25 @AALOData Syntax @AADACHKcr Related Command Sec.2.23 @AAEAT Related Topic26 @AADA Syntax @AACACHKcr 27 @AACA Syntax @AARHCHKcr Read address 01 high alarm, return +2.5000. Related Command28 @AARH 29 @AARL Syntax @AARECHKcr Read address 01 event counter, return 1234. Related Command30 @AARE Syntax @AACECHKcr 31 @AACE Description Host OK 32 ~Syntax ~**CHKcr Response No response. Example 33 ~AA0 Host watchdog timeout flag, 0=Clear, 1=Set ExampleSyntax ~AA0CHKcr AASSCHKcr Syntax ~AA1CHKcr 34 ~AA1 Syntax ~AA2CHKcr 35 ~AA2 Syntax ~AA3EVVCHKcr 36 ~AA3EVV Syntax ~AA4CHKcr 37 ~AA4AAPPSSCHKcr SS Safe Value, data format is same as PP Example Syntax ~AA5PPSSCHKcr 38 ~AA5PPSS Module Status INIT* pin Operation Digital Input and Event Counter Dual Watchdog OperationDigital Output Dual Watchdog = Module Watchdog + Host Watchdog Thermocouple Measurement High/Low Alarm