NOTE: Multiple configuration commands may be sent while the PDI is in command mode. Each command should be terminated with a Carriage Return.
5.2.1DEBOUNCE DELAY COMMAND
The Debounce Delay (DB) command programs the PDI Debounce Delay time (see Section 4.2.2 and Section 5.1.3). The Debounce Delay command has the following format:
DBn<cr>
where n = 0 to 65535 milliseconds.
5.2.2REPORTING METHOD COMMAND
The Reporting Method (RM) command programs the PDI Reporting Method (see Section 4.2.2.1 and Section 5.1.4.1). The Reporting Method command has the following format:
RMn<cr>
where n = 1 to 3. 1 = Command, 2 = Immediate and 3 = Schedule.
5.2.3TIME TAG COMMAND
The Time Tag (TT) command is used to enable or disable time tagging as described in Section 4.2.2.5 and Section 5.1.4.5. The Time Tag command has the following format:
TTn
where n = 1 or 2. 1 = enable and 2 = disable.
31
