Adding T26 Validation
T26 validation is applicable in cases where a field’s value should not start or end with a slash ‘/’ and not contain two consecutive slashes ‘//’.
1.Add a new validation.
2.Select ‘Type’ as ‘T26’ in the ‘Type’ column.
3.The error code will be automatically set as ‘T26’. You need not change it.
4.Specify the qualifiers, field options, null field and comment properties as specified earlier.
5.The description and usage for this validation type will be displayed at the bottom.
See Also:
Specifying properties common for all validations
Adding validations for a
Removing validations from a sub field
Adding T14 Validation
This validation is applicable for Amount\Rate\Balance\Number fields whose sign must be present when their value is
1.Add a new validation.
2.Select ‘Type’ as ‘T14’ in the ‘Type’ column.
3.The error code will be automatically set as ‘T14’. You need not change it.
4.Specify the qualifiers, field options, null field and comment properties as specified earlier.
5.From the Sign Field
