Windows® 95 / 98 and NT® (continued)
En
Setting up the Bitronics Software for use with 1 PC to 4 Devices
Before anything else, make sure that the drivers of the four devices are installed on the computer already, and that each device has been tested and works on its own.
When one computer is switching between four devices, the AutoSwitch communicates to one device at a time only, and does not know which device to connect to unless instructed by the user. Through the use of the Bitronics software, the AutoSwitch receives commands from the computer, instructing it to switch to a particular port.
The Bitronics Software will pop up:
Select the correct LPT port the Bitronics switch is connected to. If you only have ONE parallel port (usually that is the case), leave this in LPT1.
9
