Belkin Range Extender/ Access Point manual Saving a Current Configuration

Changing System Settings

3.The following message will appear. Restoring the defaults includes restarting the WURE. It can take up to 60 seconds. It is important not to turn the power off on the WURE during the restart.

4.A 60-second countdown will appear on the screen. When the countdown reaches zero, the WURE’s defaults will be restored. The WURE home page should appear automatically. If it does not, type in the WURE’s address (default =192.168.2.254) into the navigation bar of your browser.

Saving a Current Configuration

You can save your current configuration by using this feature. Saving your configuration allows you to restore it later if your settings are lost or changed. We recommend that you back up your current configuration before performing a firmware update.

1.Click “Save”. A window called “File Download” will open. Click “Save”.

1

2

3

4

5

6

7

section

35