Belkin Range Extender/ Access Point Home Button, Help Button, Login/Logout Button, Version Info

Using the Web-Based Advanced User Interface

(2) Home Button

The home button is available in every page of the UI. Pressing this button will take you back to the home page.

(3) Help Button

The “Help” button gives you access to the WURE’s help pages. Help is also available on many pages by clicking “more info” next to certain sections of each page.

(4) Login/Logout Button

This button enables you to log in and out of the WURE with the press of one button. When you are logged in, this button will change to read “Logout”. Logging into the WURE will take you to a separate login page where you must enter a password. When you are logged in, you can make changes to the settings. When you are finished making changes, you can log out by clicking the “Logout” button. For more information about logging into the WURE, see the section called “Logging into the WURE”.

(5) Version Info

Shows the firmware version, boot-code version, hardware version, and serial number of the WURE.

(6) LAN Settings

Shows you the settings of the Local Area Network (LAN) side of the WURE. Changes can be made to the settings by clicking on any one of the links (IP Address, Subnet Mask) or by clicking the “LAN” Quick Navigation link on the left side of the screen.

(7) Features

Shows the status of the WURE’s wireless setting. Changes can be made to the settings by clicking on any one of the links or by clicking the “Quick Navigation” links on the left side of the screen.

Using your Internet browser, you can access the WURE’s Web-Based Advanced User Interface. In your browser, type “192.168.2.254” (do not type in anything else such as “http://” or “www”). Then press the “Enter” key.

1

2

3

4

5

6

7

section

17