5. SYSTEM SETUP: Advanced menu
6. INFORMATION menu
FUNCTION | DESCRIPTION | |||
| AMX Device Discovery | |||
Network Settings | Selecting On the projector can be detected by AMX controller. | |||
Mac Address | ||||
| ||||
| Show Mac address. | |||
|
|
|
| |
| Returns all settings to the factory preset values. | |||
|
|
| The following settings will still remain: Position, Phase, H. Size, | |
|
|
| ||
|
|
| User 1, User 2, Language, Projector Position, High Altitude | |
|
|
| ||
|
|
| Mode, Security Settings, Baud Rate. | |
Reset All Settings |
|
|
| |
| Source |
| Shows the current signal source. |
| Picture Mode |
| Shows the selected mode in the PICTURE menu. |
| Resolution |
| Shows the native resolution of the input signal. |
| Lamp Mode |
Current System | Shows the current lamp mode. |
| |
Status | 3D Format |
| Shows the current 3D mode. |
| Color System |
| Shows input system format, NTSC, PAL, SECAM, or RGB. |
| Equivalent Lamp |
| Displays the number of hours the lamp has been used. |
| Firmware Version |
| Shows firmware version. |
Operation 85
