BenQ MW767, MX766, MX822ST user manual

ii.You can select to Play/Pause displaying desktop contents to connected network display.

iii.4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click the location you want to display. 4locations can be chosen (1-4) or 2 places (L and R) if it’s 2 computers. Once you click the place you want to display, the image

appers on th eprojector. You can change th elocation anytime you want, even back to full screen or blank out.

The Basic and Advanced Settings pages allow you to configure the Q Presenter.

i

ii

iii

iv

v
	vi

i.You can select whether to activate Remote Desktop function. If the Remote Desktop function is activated, you can change the Name and Password. If it isn’t activated, the Name and Password will be gray out.

ii.You can set the name and password of the connected computer. The Name must be eight capital letters from A-Z & 0-9. The Password must be 6 digits from 1 to 4.

iii.When you install the Q Presenter, the program will automatically identify the language of your computer’s operating system and install the same language as your operating system. If your language isn’t included, the system will keep English as the default setting.

iv.You can select whether to allow notification message popup.

v.Once you set to activate 1:N display, 1PC/NB can display up to 8 projectors at the same time.

vi.Once set, press Apply to save the changes.

Operation 61