BenQ MX822ST Remote control, 1. ON, S-Video, Menu/Exit, Keystone/Arrow keys /Up Down, Mode/Enter

Remote control

1	14
	15
2	16
3	17
4
	18
5
	6
6
7	19
8
5	20
9	21
10
11	22
12	23
13	24

1.ON

Turns on the projector. See "Starting up the projector" on page 29 for details.

2.COMPUTER 1/COMPUTER 2 Displays RGB (PC)/Component video (YPbPr/ YCbCr) signal.

3.S-VIDEO

Displays S-video signal.

4.MENU/EXIT

Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings. See "Using the menus" on page 33 for details.

5.Keystone/Arrow keys ( /Up, /

Down)

Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 32 for details.

6.Volume /Arrow keys ( / Left,

/ Right)

Adjusts the sound level.

When the On-Screen Display (OSD) menu is activated, the #5, and #6 keys are used as directional arrows to select the desired menu items and to make adjusents. See "Using the menus" on page 33 for details.

7.MODE/ENTER

Selects an available picture setup mode. See "Selecting a picture mode" on page 39 for details.

Activates the selected On-Screen Display (OSD) menu item. See "Using the menus" on page 33 for details.

8.ECO BLANK

Used to hide the screen picture. See "Hiding the image" on page 44 for details.

9.PAGE + / -

Page up/down arrows when connected through USB to a PC. See "Remote paging operations" on page 44 for details.

10.ZOOM + / -

Magnifies or reduces the projected picture size. See "Magnifying and searching for details" on page 37 for details.

11.FREEZE

Freezes the projected image. See "Freezing the image" on page 44 for details.

12.NETWORK SETTING

Enables Network Settings OSD menu.

13.TEST

Displays the test pattern. See "Using build-in test pattern" on page 31 for details.

14.OFF

Turns off the projector. See "Shutting down the projector" on page 70 for details

14 Introduction