BenQ MW767, MX766, MX822ST user manual PointDraw Pen, Shutting down the projector

Models: MX822ST MW767 MX766

1 107
Download 107 pages 44.41 Kb
Page 70
Image 70
PointDraw™ Pen

PointDraw™ Pen

The PointDraw™ pen works like a wireless mouse - but one that works in midair, not on your desktop. Just hold the pen in your hand, and point it at the projected image to point, click and drag. Please find latest compatible PointDraw™ pen user guide for more detail.

Shutting down the projector

1.Press II Power on the projector. A

confirmation message displays prompting you.

If you don't respond in a few seconds, the message will disappear. If you use the remote control, press OFF to shut down the projector.

2.Press II Power on the projector a second

time. The POWER indicator light flashes orange, the projection lamp shuts down, and the fans will continue to run to cool down the projector.

• To protect the lamp, the projector will not respond to any commands during the cooling process.

• To shorten the cooling time, you can also activate the Quick Cooling function. See "Quick Cooling" on page 80 for details.

3.Once the cooling process finishes, the POWER indicator light is a steady orange and fans stop.

4.Disconnect the power cord from the power putlet if the projector will not be used in an extended period of time.

If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the projector, the fans will run for a few minutes to cool down. Press Power again to start the projector after the fans stop and the POWER indicator light turns orange.

Actual lamp lives may vary due to different environmental conditions and usage.

70 Operation

Page 70
Image 70
BenQ MW767, MX766, MX822ST user manual PointDraw Pen, Shutting down the projector