Installation
Utility Connections --- Standards and Codes
THE INSTALLATION INSTRUCTIONS CON- TAINED HEREIN ARE FOR THE USE OF QUALI- FIED INSTALLATION AND SERVICE PERSONNEL ONLY. INSTALLATION OR SERVICE BY OTHER THAN QUALIFIED PERSONNEL MAY RESULT IN DAMAGE TO THE OVEN AND/OR INJURY TO THE OPERATOR.
Qualified installation personnel are individuals, a firm, a corporation, or a company which either in person or through a representative are engaged in, and responsible for:
Dthe installation or replacement of gas piping and the connection, installation, repair or serv- icing of equipment.
Dthe installation of electrical wiring from the elec- tric meter, main control box or service outlet to the electric appliance.
Qualified installation personnel must be experi- enced in such work, familiar with all precautions required, and have complied with all requirements of state or local authorities having jurisdiction.
U.S. and Canadian installations
Installation must conform with local codes, or in
the absence of local codes, with the National Fuel Gas Code, NFPA54/ANSI Z223.1
Installation must conform with local codes, or in the absence of local codes, with the National Elec-
trical Code, ANSI/NFPA 70
ble.
Australia and general export installations
Installation must conform with Local and National installation standards. Local installation codes and/or requirements may vary. If you have any questions regarding the proper installation and/or operation of your Blodgett oven, please contact your local distributor. If you do not have a local dis- tributor, please call the Blodgett Oven Company at
10
