Bosch Appliances BOSCH Washer manual Transport Such When Moving Out

￿ Prepare the transport bolts: Loosen the screw in the sleeve until the end of the screw is level with the end of the sleeve.

Water drainage

￿ CAUTION ￿

Do not bend or pull the water drainage hose.

Height difference between the installation location of the washing machine and the drainage point: Maximum 8 feet￿/ 244 cm.

In-Wall Installation	Transport,				such			as
	when		moving				out
	Before transporting					the	washing
	machine:
	-	Turn	off	the	water.
	-	Disconnect the				washing
		machine		from		the	main outlet.
	-	Dismantle		the		supply		and
		drainage		hoses.

Connecting the water drainage hose

￿ Use the elbow.		Attach		the	-
elbow to	the end		of the hose
and insert	end	of	hose	into wall
					i
drain.

￿Use a strap or cable tie to hold hose in place.

Drainage into a siphon

Install the transport bolts.

Having transported the appliance and ensured proper installation and connection￿ allow theDrain program to run through before starting the first wash program.

Preparing and inserting the transport bolts

￿Attach the drain hose to the end of the drain connection.

￿Secure the connection point

with	the clamp.	￿ Secure	the	connection	point
		with a	hose	clip ￿not	￿ Remove the covers.
Use	a screwdriver!				included in

factory-supplied equipment￿.

Standpipe Installation

Drainage into a sink

￿ CAUTION ￿

￿

Ensure that the plug is not in the drain hole.

￿Use the elbow. Attach the elbow to the end of the hose and insert end of hose into standpipe.

￿Use a strap or cable tie to hold hose in place.

￿Attach water drain hose securely to sink.

￿When the water is being drained￿ check that the water flow out of the sink is adequate.

Insert and tighten all transport bolts. The lug on the washing machine must be located in the groove in the rear panel of the housing.

12