D9112B | Program Entry Guide | 2.0 Area Wide Parameters EN | 35
Bosch Security Systems | 2/04 | 74-06145-000-D
Set a schedule for disarming and arming. The
disarming and arming schedules provide several
independent features:
• Suppress normal
Opening
and/or
Closing
reports when
A# Disable O/C
in Window
is
programmed YES.
• Generate a
Fail to Open
report if the area is not
disarmed on schedule when
A# Fail To Open
is programmed YES.
• Provide a warning tone and PLEASE COME
NOW display at the command center when it is
time to arm the area.
• Generate a
Fail to Close
report if the area is not
armed on schedule when
A# Fail To Close
is
programmed YES.
• Automatically arm the area at the end of the
closing window when
A# Auto Close
is
programmed YES.
Opening and closing schedules can be set up
independently. For example, if you only want to use
features provided by closing windows, leave times
blank in the opening window prompts and program
closing window times.
A worksheet is provided at the end of this section for
your convenience. Following the worksheet are
examples of how to program opening and closing
windows for particular applications.
About the Program Record Sheet: Two columns
labeled “Sked #” appear on the Program Record Sheet
provided with the D9112. These numbers appear in
D6500 reports and local printer reports when the
window
Begin Time
executes.
Window
Default: 1
Selection: 1 to 16
Enter the window number you want to program.
W## Sunday
This prompt, and the next six days of the week
prompts, select the days of the week that the
opening and/or closing windows are active.
Exceptions: To prevent the windows from
activating on certain days of the year, program
Xept
Holiday
YES, and enable at least one Holiday
Index. When
Xept Holiday
is YES, the window
executes on the days of the week programmed
unless the date is designated as a Holiday by the
Holiday Index selected.
If opening and/or closing windows are only needed
on certain days of the year, do not program the
windows to execute on any days of the week.
Instead, program
Xept Holiday
NO, and select a
Holiday Index with the days of the year you want
the window to be active.
Default: No
Selection: Yes or No
Yes Activate this window on Sundays.
No Do not activate this window on
Sundays.
W## Monday
Default: No
Selection: Yes or No
Yes Activate this window on Mondays.
No Do not activate this window on
Mondays.
W## Tuesday
Default: No
Selection: Yes or No
Yes Activate this window on Tuesdays.
No Do not activate this window on
Tuesdays.
W## Wednesday
Default: No
Selection: Yes or No
Yes Activate this window on Wednesdays.
No Do not activate this window on
Wednesdays.