Bosch Appliances DVR 440, DVR 480 operation manual Monitor connections, VGA Monitor a, 2CVBS

22 en Hardware setupDigital Video Recorder 440/480 Series

4.3	Monitor connections
	Up to two monitors can be connected through the VGA and CVBS connections.
4.3.1	VGA (Monitor A)
	Connect the unit to one VGA monitor using standard VGA cable. It is advised to use 17”
	monitors or larger when using LCD(s).

Specifications

Output signal: VGA

Resolution: 800x600, 1024x768, or 1280x1024

Color: True color (32 bit)

Connector type: DE-15

Figure 4.3 VGA monitor connector

4.3.2CVBS

Connect the unit to a CCTV monitor using 75 ohm video coaxial cables with BNC connectors. The unit provides a 1 Vpp CVBS signal.

If the monitor has a loop-through connection and the loop-through output is available, select the 75 ohm impedance setting on the monitor. If the monitor's loop-through output is connected to an additional device, the device's termination is set to 75 ohm and the monitor's termination is set to high impedance.

Note: This is not necessary on devices with automatic termination.

Specifications

Output signal: Composite video 1Vpp, 75 ohm, Sync. 0.3Vpp ±10%

Resolution: 720x576 PAL, 720x484 NTSC

Connector type: BNC

Figure 4.4 CVBS monitor connector

AM18-Q0605 v2.0 2012.04 Installation and Operation manual Bosch Security Systems