Bosch Appliances DVR 440, DVR 480 Camera views, Zoom, focus, and iris, Pre-position, Aux commands

78 en Web Client Software Digital Video Recorder 440/480 Series

3.Click and hold the left and right arrows to pan.

4.Release the mouse button to stop camera movement controls.

Zoom, focus, and iris

To control the zoom, focus, and iris of PTZ cameras:

1.Select the cameo of the camera to be controlled.

2.Click and hold the left zoom button to zoom out; click and hold the right zoom

button to zoom in.

3.Click and hold the left focus button for far focus; click and hold the right focus

button for near focus.

4.Click and hold the left iris button to close the iris; click and hold the right iris

button to open the iris.

5.Release the mouse button to stop camera adjustment controls.

Pre-position

To move the active camera to a pre-position:

1.Enter a pre-position number using the keyboard.

2.Click Shot (or press enter).

Click buttons one to six for immediate positioning to one of the first six pre-positions.

To store the current position of the camera in a pre-position:

1.Position the camera.

2.Enter a pre-position number.

3.Click Set.

Aux commands

Aux commands are special commands for controlling cameras. To switch on the Aux command:

1.Enter an Aux number.

2.Click Aux + (or press enter).

3.To switch off the Aux command, click Aux -.

7.4.2	Camera views
	To switch the display mode, click one of the camera view				buttons to
	change the cameo display configuration:
	–	Single	view, Quad	view, and Sequence	display modes are available.
	–	Full Screen	expands the current display mode to fill the entire screen. Press ESC to
		exit Full Screen.

AM18-Q0605 v2.0 2012.04 Installation and Operation manual Bosch Security Systems