Digital Video Recorder 440/480 Series | Configuration menu en 69 |
| |
6.5.6Mail
Figure 6.19 Network - Mail
1.Enable Send Mail to have an e-mail sent out from the system according to the settings in the Notification Menu.
2.Use More E-mail Settings to set the From, Subject, and up to three recipients.
–The E-mail Test button will immediately generate an e-mail to help verify that the unit settings are correct.
SMTP Server
Set to the mail server that processes outgoing e-mail for your network. This can be either an IP address or a Fully Qualified Domain Name (ex. 10.0.0.1 or smtp.example.com)
SMTP Port Number
This is the port the mail server receives e-mail on. The internet standard for e-mail is port 25, but some servers use different ports to protect against being used to transmit bulk, unsolicited e-mail.
SSL
Some mail servers require encryption to transmit e-mail. If required, this option allows SLL encryption to be used to send e-mail. If not required, do not enable this feature.
User name and Password
If authentication is required, regardless of encryption, enter the User name and Password provided by your administrator in each field respectively.
More E-mail Settings - From
This is the e-mail address that will appear as the sender of all e-mail originating from the unit.
More E-mail Settings - Subject
This is the subject that will appear in all e-mail sent by the unit.
More E-mail Settings - To
Enter up to three e-mail addresses that outgoing e-mail should be sent to.
