Brother 885-V33, 885-V31 operation manual Darning, Memo, Utility Stitches

UTILITY STITCHES ———————————————————————————————————————————

Darning

Fabric that has been torn can be darned. Darning is sewn as shown below.

aReinforcement stitching

aDetermine the desired length of the darning. Set the button guide plate on buttonhole foot "A" to the desired length. (The distance between the markings on the presser foot scale is 5 mm (3/16 inch).)

1

2

3

4

aPresser foot scale

bLength of darning

c5 mm (3/16 inch)

d7 mm (1/4 inch)

Memo

zA bar tack with a maximum length of about 28 mm (1-1/8 inches) can be sewn.

bAttach buttonhole foot "A".

•For details on replacing the presser foot, refer to "Replacing the presser foot" (page 43).

a

a

cSelect stitch 58 or 59 .

•For details, refer to "Selecting stitching" (page 49).

dPosition the fabric so that the needle is 2 mm (1/16 inch) in front of the area to be darned, and then lower the presser foot lever.

1

2

aTear

b2 mm (1/16 inch)

•Pass the upper thread down through the hole in the presser foot.

106