Brother 885-V33, 885-V31 Memo, Embroidery, Cut the thread at the edge of the stitching

EMBROIDERY —————————————————————————————————————————————

dLower the presser foot lever.

a

aPresser foot lever

ePress (Start/stop button).

a

aStart/stop button

CAUTION

●Use the embroidery frame that matches the size of the pattern being embroidered. Otherwise, the embroidery frame may be hit by the presser foot and cause injury or needle breakage.

fAfter progressing 5-6 stitches, press (Start/stop button) to stop the machine.

gUse scissors to cut the thread at the beginning of the stitching.

Cut the thread at the edge of the stitching.

Note

zIf the thread is left at the beginning of the stitching, it may be sewn over as you continue embroidering the pattern, making it very difficult to deal with the thread after the pattern is finished. Trim the thread at the beginning.

hPress (Start/stop button) again.

XThe embroidery begins again.

XStitching stops automatically with reinforce- ment after one color has been completed. When automatic thread cutting is set, the thread is cut.

iSet up embroidery thread for the next color, and repeat steps b through h.

XWhen the last color is sewn, "Finished sewing." will appear on the display. Press

, and the display will return to the initial screen.

jCut the excess thread.

Memo

zFor the automatic cutting setting, refer to "LCD (liquid crystal display) operation" (page 135).

140