Brother 885-V33 Threading the upper thread, Memo, Getting Ready, X The presser foot is raised

GETTING READY ————————————————————————————————————————————

Threading the upper thread

Set the spool of thread on the spool pin, and then thread the machine.

CAUTION

●When threading the upper thread, carefully follow the instructions. If the upper threading is not correct, the thread may become tangled or the needle may bend or break.

aTurn on the machine.

bRaise the presser foot lever.

a

aPresser foot lever

XThe presser foot is raised.

Memo

zIf the presser foot is not raised, the sewing machine cannot be threaded.

cPress (Needle position button) once or twice to raise the needle.

a

aNeedle position button

Note

zThe needle is correctly raised when the mark on the handwheel is at the top, as shown below. Check the handwheel and, if this

mark is not at this position, press (Needle position button) until it is.

a

aMark on handwheel

dPick up the spool pin and remove the spool cap that is inserted onto the spool pin.

ba

aSpool pin

bSpool cap

ePlace the spool of thread onto the spool pin. Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom.

32