Brother 885-V31 Memo, Selecting Embroidery Patterns, Example Selecting an embroidery pattern

————————————————————————————————————————————————————

Press this key to change the thread settings.

Press this key to select or cancel programmed thread cutting.

Press or to change the thread density (characters and frame patterns only).

Press this key to adjust the pattern.

Press this key when you want to change the color, character by character in character embroidery. Since the sewing machine stops at the end of each character, the upper thread is changed as you sew.

Press this key again to cancel multi- color.

The needle progresses one color or one stitch (if pressed continuously, 9 stitches to 30 stitches) at a time and changes the position for starting the embroidery. This is used when a specific color is not sewn or when restarting the sewing machine after power has been turned off in the middle of the operation.

Back one color

Forward one color

Back one stitch

Forward one stitch

• For details, refer to "Resewing" (page 147).

The position of the pattern within the embroidery frame can be checked, and the size and angle can be changed.

For details, refer to "Adjusting the layout and the size" (page 143).

4

Memo

zKeys that appear surrounded with a dotted

line (ex. ) cannot be used.

Example: Selecting an embroidery pattern

Press this key to check the order of

multi color. Press	to
switch the display.

Selecting Embroidery Patterns 135