Brother 885-V31, 885-V33 operation manual Upper Threading, In such a case, start from m again

————————————————————————————————————————————————————

oLower the needle threader lever on the left side of the machine as much as possible to make the hook turn.

a

aNeedle threader lever

Ta

Tb

aNeedle

bHook

Note

zIf the needle threader lever is not lowered as much as possible, the hook will not turn fully as shown below and the thread will not pass through the eye of the needle.

In such a case, start from m again.

zIf the needle is not raised, the needle threader cannot thread the needle. Be sure

to press (Needle position button) to raise the needle before using the needle threader. For details, refer to step c of "Threading the upper thread" (page 32).

pRaise the needle threader lever slowly. Ta

1

aNeedle threader lever

qRaise the presser foot lever, and carefully pull the loop of the thread through the eye of the needle to pull out the end of the thread.

CAUTION

●Do not touch a button. If a button is accidentally pressed, the machine starts sewing, and your finger may be pricked with the needle or the needle may break.

●When pulling out the thread, do not pull it with extreme force, otherwise the needle may bend or break.

rPass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine.

a

a5cm (2 inches)

XThe upper threading is finished.

Upper Threading 35