Brother 885-V33, 885-V31 Getting Ready, Buttonhole foot A Overcasting foot G Zigzag foot J

GETTING READY ————————————————————————————————————————————

ePlace a different presser foot below the holder so that the presser foot pin is aligned with the notch in the holder.

Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read.

a

bc

aPresser foot holder

bNotch

cPin

fSlowly lower the presser foot lever so that the presser foot pin snaps into the notch in the presser foot holder.

a

b

c

d

aPresser foot lever

bPresser foot holder

cNotch

dPin

XThe presser foot is attached.

gRaise the presser foot lever to check that the presser foot is securely attached.

Note

zWhen a stitch is selected, the icon for the presser foot that should be used appears in the screen. Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again.

Buttonhole foot "A"

Overcasting foot "G"

Zigzag foot "J"

Button fitting foot "M"

Monogramming foot "N"

Blind stitch foot "R"

Side cutter "S" (option)

zFor details on the presser foot that should be used with the selected stitch, refer to "Stitch Setting Chart" (page 70).

44