Brother 885-V31, 885-V33 operation manual Blind Hem Stitching

————————————————————————————————————————————————————

dFold back the fabric inside along the basting.

24

3

1

1

S< Seen from the side>

aWrong side of fabric

bEdge of fabric

cBasting

d5 mm (3/16 inch)

eUnfold the edge of fabric, and position the

fabric with the wrong side facing up.

3

1 1

2

1 1

S< Seen from the side>

aWrong side of fabric

bBasting

cEdge of fabric

fAttach blind hem foot "R".

R

•For details on replacing the presser foot, refer to "Replacing the presser foot" (page 43).

gSelect a stitch.

•For details, refer to "Selecting stitching" (page 49).

hRemove the flat bed attachment and make free-arm sewing possible.

•For details on free-arm sewing, refer to "Free- arm sewing" (page 46).

iSlide the part that you wish to sew onto the arm, make sure that the fabric feeds correctly, and then start sewing.

a

3

aArm

jPosition the fabric with the edge of the folded hem against the guide of the presser foot, and then lower the presser foot lever.

R

1	c
	b

aWrong side of fabric

bFold of hem

cGuide

kAdjust the stitch width until the needle slightly catches the fold of the hem.

R

1

aNeedle drop point

When you change the needle drop point, raise the needle, and then change the stitch width.

a

aStitch width

Blind Hem Stitching 81