Brother 885-V31, 885-V33 Editing and Saving Patterns, Adjusting the layout and the size, Memo

————————————————————————————————————————————————————

Editing and Saving Patterns

This section describes ways to edit, adjust, reposition and memorize patterns.

Adjusting the layout and the size

The pattern is normally positioned in the center of the embroidery frame. You can check the layout before starting embroidery and change the position and the size.

Memo

zKeys that appear surrounded with a dotted

line (ex. ) cannot be used.

aAfter selecting. the embroidery pattern, press

XThe sewing screen is displayed.

bPress .

XThe layout LCD is displayed.

cCheck and adjust the layout.

a Layout within the frame
b Display unit (cm/INCH)
c Available embroidery frames
d Change position keys
e Size key/Layout key	4
f Rotation key
g Horizontal mirror image key

h Trial key

i Starting point key

j Distance from the center k Embroidery size

Embroidery frame size

The size of embroidery frame that can be used is displayed. When the smaller mark is grayed out in the display, embroidery frame (small) cannot be used. These icons flash if the pattern was resized, the layout was adjusted, or the recommended embroidery frame size was changed.

CAUTION

●Use the embroidery frame that matches the size of the pattern being embroidered. Otherwise, the embroidery frame may be hit by the presser foot and cause injury or needle breakage.

Editing and Saving Patterns 143