Brother 885-V31, 885-V33 operation manual Decorative Stitching

————————————————————————————————————————————————————

cSelect a stitch.

The stitches that can be used are 39 , 40 ,

41, 42, 43, 44, 45, 46 or 47.

•For details, refer to "Selecting stitching" (page 49).

Note

zWhen sewing with the wing needle, select a stitch width of 6.0 mm (15/64 inch) or less.

dStart sewing.

CAUTION

●When sewing with the wing needle, select a stitch width of 6.0 mm (15/64 inch) or less, otherwise the needle may bend or break.

●After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

Partially removing threads is called "drawnwork". This gives a beautiful result with fabrics that have a loose weave.

Two ways to create drawnwork are described below.

■Drawnwork (Example 1)

aPull out several threads from the fabric.

3

bAttach monogramming foot "N".

•For details on replacing the presser foot, refer to "Replacing the presser foot" (page 43).

cSelect stitch 39.

•For details, refer to "Selecting stitching" (page 49).

dWith the right side of the fabric facing up, sew along the right edge of the frayed section.

N

Decorative Stitching 115