Brother manual Using the PT-9200DX, Installing the tape cassette

Using the PT-9200DX

After you have designed a label layout using the P-touch Editor application, you can print it out to make a label.

Installing the tape cassette

1Press down on the cover release button and lift open the tape compart-

ment cover.

2If you are using a new tape cassette, first remove the stopper. (Some tape cassettes may not be installed with a stopper.) Make sure that the end of the tape feeds under the tape guides.

3Insert the tape cassette firmly into the compartment, making sure that the entire back of the cassette touches the bottom of the compartment.

￿When inserting the tape cassette, make sure that the ink ribbon does not catch on the corner of the metal guide.

Be sure not to touch the print head.

End of the tape

Tape guide

4Close the compartment cover, and then press the on/off button to turn on the PT-9200DX .

25