Brother Monitoring the P-touch Status, PT-9200DX status, Power button light Description/Remedy

Monitoring the P-touch Status

You can determine the status of the PT-9200DX from the power button light.

PT-9200DX status

Power button light	Description/Remedy
Lights up in green	• The P-touch is operating normally and is in stand-by.
Flashes in green	• The P-touch is receiving data from the computer correctly.
Lights up in orange	• While in stand-by, the P-touch detected that the tape cassette was not
	inserted correctly. Correctly insert the tape cassette. Printing will begin
	when the tape cassette is correctly inserted.
	• The tape compartment cover is not completely closed. Close the tape
	compartment cover.
Flashes in orange	• While receiving data, the P-touch detected that the tape compartment
	cover was not completely closed or that the cover was opened. Close
	the tape compartment cover. Printing will begin when the tape com-
	partment cover is closed.
Flashes in red	• While printing, the P-touch detected that a tape cassette was not in-
(Correct the problem, and then try printing	serted or that the tape cassette ran out of tape. Insert a tape cassette or
again.)	replace it.
	• Before or during printing, the tape compartment cover was opened.
	Close the tape compartment cover.
	• A data transmission error occurred. After about five seconds, the P-touch
	will return to stand-by (the power button will light up in green).
Lights up in red	• Turn off the P-touch, and then turn it on again.
(Correct the problem, and then try printing	If the power button continues to light up in red, contact your service
again.)	representative.

28