Brother 9200DX manual When connecting to the USB port, Computer using the USB interface cable

When connecting to the USB port:

￿You must install the software first before connecting to the USB interface or turning on the power. Please follow the installation procedures on pages 6 through 12 before connecting up or turning the power on. The Brother P-touch installation software will instruct you when to do this.

USB

1Connect one end of the enclosed USB interface cable to the USB connector () of the PT-9200DX and the other end of the cable to the USB port of the computer.

￿Do not connect the PT-9200DX to the computer using both the serial and the USB interface cables, otherwise the PT-9200DX may be damaged.

￿When making a USB connection through a hub, a proper connection may not be possible due to the type of hub used. If printing is not possible with a hub connection, try connecting the PT-9200DX directly to the

computer using the USB interface cable.

2Insert the plug on one end of the power supply cord into the power supply jack on the PT-9200DX.

3Insert the plug on the other end of the power supply cord into an AC outlet equipped with a grounding terminal. Some locations may require the use of an adapter provided with a grounding wire. Connect this wire to the ground terminal.

5