Brother 9200DX manual With Windows 98/98SE/Me/2000 Professional, With Windows XP

8If “Replace with new Brother PT-9200DX” or “Add Brother PT-9200DX” was selected:

With Windows® 98/98SE/Me/2000 Professional:

A dialogue box appears, instructing you to connect the PT-9200DX to the computer.

Connect the PT-9200DX to the computer using the enclosed USB interface cable as described on page 5, and then turn on the PT-9200DX. A dialogue box appears, showing that the printer driver has been installed.

Select “Yes, restart immediately.”, and then click the Finish button to restart the computer.

With Windows® XP:

In the first Found New Hardware Wizard dialog box that appears, select “Install the software automatically (Recommended)”, and then click the Next button.

If the dialog box warning appears indicating the software has not passed Windows Logo testing, simply continue with the installation.

In the Found New Hardware Wizard dialog box that appears, indicating that installation of the PT-9200DX and the Found New Hardware Wizard are finished, click the Finish button.

If the dialog box warning that the software has not passed Windows Logo testing appears again, click the Continue Anyway button to continue with the installation (since this printer driver has already cleared strict product quality standards of our testing).

In the dialog box that appears, indicating that installa- tion is finished, select “Yes, restart immediately.”, and then click the Finish button. The computer is restarted.

Remove the CD-ROM from the computer.

17