Brother 9200DX Using the Change Baud Rate Wizard, Button to start up the Change Baud Rate Wizard

5Check that the installation will be carried out as desired, and then click the Next button. A dialogue box appears, showing that the printer driver has been installed.

6If the port where the PT-9200DX is connected supports a baud rate of 115,200 bps, click the Next button.

If the port where the PT-9200DX is connected does not support a baud rate of 115,200 bps, or if you wish to check the connection between the PT-9200DX and the computer, select “Start up the Change Baud Rate Wizard”, and then click the Next button to start up the Change Baud Rate Wizard. After changing the baud rate as described by steps 3 through 6 in the section Using the Change Baud Rate Wizard on page 9, continue with step 7 below.

7A dialogue box appears, showing that installation is finished.

Select “Yes, I want to restart my computer now.”, click the Finish button to restart the computer, and then remove the CD-ROM from the computer.

Using the Change Baud Rate Wizard

If the PT-9200DX is connected to a port that does not sup- port a baud rate of 115,200 bps, or if you wish to check the connection between the PT-9200DX and the computer, start up the Change Baud Rate Wizard and select the desired settings as described below.

1From the Start menu, point to “Settings”, and then click “Printers” to open the Printers folder.

(For Windows® XP, click “Printers and Faxes” in the Start menu to open the Printers and Faxes folder.)

2With Windows® 95, 98, 98SE and Me: Right-click the Brother PT-9200DX icon, and then click “Properties” in the pop-up menu that appears. On the Advanced tab of the dialog box that appears, click the Baudrate button to start up the Change Baud Rate Wizard.

With Windows® NT 4.0:

Right-click the Brother PT-9200DX icon, and then click “Properties” in the pop-up menu that appears. On the Device Settings tab of the dialog box that appears, click “Baud Rate...” in the tree view to display the Change ‘Baud Rate’ Setting section at the bottom of the dialog box. Click the Baud Rate...

button to start up the Change Baud Rate Wizard.

With Windows® 2000 and XP:

Right-click the Brother PT-9200DX icon, and then click “Properties” in the pop-up menu that appears. On the Device Settings tab of the dialog box that appears, click “Baud Rate...” in the tree view, and then click the Properties... button that appears on the right side to start up the Change Baud Rate Wizard.

3A dialogue box appears, allowing you to select the serial port where the PT-9200DX is connected.

Select the appropriate serial port, and then click the Next button. A dialogue box appears, allowing you to select the desired baud rate.

For Windows®

9