Brother manual Printing a label, Turn on the PT-9200DX and start up the computer

5After the on/off button lights up in green, press the feed/cut button once to remove any slack in the tape and cut off the excess.

Printing a label

1Turn on the PT-9200DX and start up the computer.

2Start up P-touch Editor and make sure that “PT-9200DX ” is selected as the printer in the Print Setup dialogue box ([Print Setup] command in the [File] menu of the PC software) or in the Chooser (when using the Mac software).

3In the Size setting of the Page Properties, select the desired label size, and then design your label layout.

4Click the [Print] command in the [File] menu, select the desired settings in the Print dialogue box, and then click the OK button. The on/off button on the PT-9200DX flashes in green while it is receiving the data. After the label is printed, it is fed from the tape exit slot and automatically cut off if the “Auto Cut” option was selected.

￿If the “Half Cut” option was selected, press the feed/cut button once to cut off the label.

While printing multiple copies of labels, the printing speed may be decreased so that a high resolution can be maintained.

26